Laerdal Virtual Phlebotomy - Manual (Page 24)

Setting up the System
www.laerdal.com 24
Virtual Phlebotomy
Directions for Use
Plug the (7) USB cord and (8) Power Cord into the back of the haptic device. (9) Plug the power
cord from the wall socket into the power brick. The haptic device, which has been pre-calibrated by
the manufacturer, is now ready to use with the simulator:
(10) The completed, set-up Virtual Phlebotomy™ Self-Directed Learning System. Note the location
of the haptic device directly in front of the monitor.
9
7 8