LG Motorsports LG G5 Coil Overs - Manual (Page 13)

Figure 25: Tighten spindle to strut mounting bolts.
Figure 26: Attach brake line hold down, wheel speed sensor, and end link
Repeat these steps for the opposite side of the car. Please keep in mind again the spindle
bolts control camber settings for the car and thus you will have to have your car re-
aligned. We suggest starting with the camber settings at max for a rough starting point.
With the front completed we move onto the rear of the car and removal of the upper
spring plate. Keep in mind, the spring is under pressure and you should follow all of the
steps just like you did on removal of the front spring and upper plate. Again if you do not
feel safe doing this, please take the units to a shop for removal.