LG Motorsports LG G5 Coil Overs User Manual
Page 2
Instructions:
Tips:
1. Place the car on level ground and place a piece of tap at the top of each fender arc,
measure to this and place a mark (doesn’t matter what it is), and record this. This
will give you a point of reference when installing the coil overs as to ride height
before and after.
2. For advanced users, if you have access to a scale pad, you should be shooting for
50% cross weight, LF to RR on the car.
3. Coil overs are shipped, with springs in place but not set to any specific ride
height.
Removal:
Raise the car off the ground and support via lift, or jack stands so that the car is
off of the ground enough to remove the wheels and tires. Start by removing all four
wheels and tires and set them to the side.
Once the wheels and tires are off the car we will start by getting the front ready
and removing the strut and spring assembly. You will start by removing the wheel speed
sensor wire and brake line hold down brackets shown in figures 2 and 3 below.
Figure 1: Front Suspension Assembly