LG Motorsports LG G5 Coil Overs - Manual (Page 15)

With the LG coil over and upper spring perch installed on the shock, insert this into the
factory rear upper shock/spring mounting bucket. Please re-use the bushings and washers
from the OEM kit and the supplied nut to tighten assembly together before install into
your car.
Figure 30: Completed assembly going into car.
Figure 31: Upper bucket bolts.
Once the assembly is in the car you will start by installing the upper four bolts holding
the bucket into the car. Again you will have use a hand wrench for the front inside bolt.
A socket can be used on the other three bolt locations. Blue loctite is recommended for
these bolts.