LG Motorsports LG G5 Coil Overs User Manual
Page 9
INSTALLATION:
The next few steps should be handled with care as you will be working with a
compressed spring. You should have a spring compressor or the proper tools to remove
the springs (factory or lowered) from the strut/shock assemblies. If you have any
questions about doing this part yourself, most shops can do this removal for you in a safe
manner. To remove the front upper bearing mount with OEM springs on the car you
should use a spring compressor to remove the pressure from the bearing as you remove
the upper nut. Once the nut has been removed you can remove the compressor from the
spring and disassemble the unit.
Figure 16: removal of upper shock bearing
Now that the upper bearing has been removed, you will use the LG upper spring mount
provided with your kit to mount the spring to the upper bearing mount. The curved
surface will mount to the bearing while the stepped flat surface will go against the spring.
Please follow the photos below for install.
Figure 17: LG upper spring mount adapter.