LG Motorsports Track Box for C6, Old Design User Manual

Page 2

Advertising
background image

TrackBox Operation


Operation is simple. Once installed, the TrackBox will do two things:

1. Send the “tire pressure acceptable” message to the vehicle body control module (BCM)
2. Set the default state of the Traction Control System (TCS) and Active Handling system (AH) to

“OFF”.

The TPMS settings are active at all times when the TrackBox is installed. The TCS/AH setting defaults to
“OFF”, but can easily be reactivated by pressing the TCS/AH button on the center console. Pressing the
button once reactivates both systems and puts the vehicle back to OEM mode. In OEM mode, the
button functions exactly as if the TrackBox were not installed; one press for TCS off, two presses for
“Competition mode” and press and hold to return to “TCS and AH off”.

Important Note: when the TrackBox is installed and active, the tire pressures displayed in the
vehicle DIC are NOT accurate. They may read values, or “XX”. When driving your vehicle on public
roads it is best to remove the TrackBox and return to OEM mode.




DISCLAIMER: Under no circumstances shall Cortex Performance LLC or the distributors of the
TrackBox be held liable for claims of any loss or damage, direct or indirect, arising from the sale,
installation, or use of the TrackBox. The manufacturer and its distributors will not, nor will they
authorize any representative or other individual, to assume obligation or liability in relation to the
TrackBox.

AGREEMENT: This product is intended for off-road use only. By installing or activating this
product, the end user of the TrackBox agrees to use this product in compliance with the
instructions and terms of use herein and with all State and Federal laws. Cortex Performance
provides specific instructions and safety warnings with respect to this product and its installation,
and therefore is absolved of all liability for any use of its product or consequences thereof.


Advertising