LG Motorsports Track Box for C6, Old Design - Manual (Page 3)

TrackBox Installation
To ensure proper functionality, we recommend that the TrackBox product is installed by a certified
Cortex Performance products dealer or installation shop. The TrackBox must be installed into the vehicle
CAN bus between the BCM (Body Control module) and the rest of the vehicle harness. This allows it to
communicate directly to the vehicle. The TrackBox must be mounted inside the passenger
compartment. It is not designed to be mounted outside the vehicle or in the engine compartment where
it can be exposed to high temperatures or the environment.
1. Disconnect the negative battery terminal on the vehicle.
2. Locate the BCM; in the passenger footwell of the vehicle, behind a flap of carpeting under the glove
compartment (Figure 2).
Figure 2