LG Motorsports Track Box for C6, Old Design User Manual
Page 8
14. Once the wiring has been verified, turn off the vehicle. Remove the OEM mode connector and plug
the TrackBox into the newly installed harness.
15. Restart the vehicle. It should start and function as normal, but the “Traction and Active Handling-
OFF ” message will show in the DIC as shown in Figure 10 below.
Figure 8
Note: Proper functionality can be verified by pressing the ESC button, as outlined in the
Operation section of this document. Pressing it one time should turn both systems on, and all
warnings and lamps should be OFF.
16. If step 11 and 12 were successful, affix the TrackBox into its permanent location. Using the supplied
Velcro, attach one side to the TrackBox and one piece to the vehicle in the location you prefer.
Choose a location where the TrackBox will not be disturbed and can get appropriate airflow. One
convenient location is under the stereo amplifier just left of the BCM, shown in Figure 11. Also make
sure the wires do not rub on anything which could damage the insulation.
Figure 9