Lumagen VisionPro - Manual (Page 7)

Vision Pro
™ User Manual and Installer Guide
© 2003 Lumagen, Inc. 4 Rev 1.13
User Guide
This section describes the user interface for everyday functions. For initial setup
information see the Installer Guide section.
The
VisionPro user commands can be selected with the supplied infrared remote control,
or with the RS232 serial port. Contact the installer for information on user commands if
the RS232 serial port is used.
Remote Control
The infrared remote control is shown below.
Configuration
Memory
Selection
Input Aspect
Ratio Selection
Input
Selection
Power
Image
Zoom
OSD
Input Aspect
Ratio Selection
Step
Input Aspect
Ratio Selection
Step
Activate Menu
Exit/Cancel