Mighty Mule MM600ET-PRO - Manual (Page 17)

14
2
6
1
Mounting Pull-to-Open Opener to Gate
Gate Opener Installation
OPEN gate and reattach opener with clevis pin. Check for level.
Clamp securely.
U
O
Z
7
Secure post pivot bracket to post bracket when clearance is OK
(Step 5) in both open and closed positions.
9 8
Mark middle of post bracket slots on fence post. Mark middle of
gate bracket slots on gate cross support. Remove clamps, post bracket, gate bracket, and opener. Then
use a hammer and center punch to mark hole positions.
P
S
Y
R
11 10
Drill holes completely through gate post and gate cross support. Attach post bracket assembly to fence post. NOTE: Must be
through bolted.
Your Property