MOCET IP3021A - Manual (Page 43)

Page 43
MOCET IP3022 SOHO IP Deskphone User Guide
Usage: Press the Hot Desking key to enter Hot Desking menu.
Note:
1. When you log in the phone using a new account, the existing account will be cleared
out.
2. Contact your system administrator for login account.
2.8. Configuring Extended Dial Modules (IP-EDMX)
The 24 programmable keys on IP-EDMX has the same predefined functionalities as the 8
programmable keys on the phone.
To configure the programmable key:
1. Press the “Menu” sofk-key below the LCD screen.
2. Select “Features” in the main menu.
3. Select “EDM Setting” in the features.
4. Select “EDM 1” or ”EDM 2” in the EDM setting.
5. Select “Key 1”, “Key 2”,..... “Key 24” in the key selection.
6. Select a desired function for the selected key.
7. Enter a corresponding value for the Function Number field of the selected key.
8. Select a line in the Line Selection for the selected key.
2.9. Viewing Your Phone’s Information
Using the menu of the phone, you can check the phone’s model name, serial number,
MAC address, firmware version, and network status.
To view the information:
1. Press the “Menu”.
2. Select “Status”.
3. Use the Navigation Up and Down keys to view the information.
2.10. Resetting Your Phone
In user mode, you can reset the user configuration or phonebook of the phone.
To reset either one of them:
1. Press the “Menu” sofk-key below the LCD screen.
2. Select “Reset to Factory” in the main menu.
3. Select “Reset User CONFIG” or “Reset Phonebook” in the reset type.