PermaGreen Triumph Spreader Sprayer - Manual (Page 32)

Sprayer Operation and Calibration 28
Applying the Spray.
Plan the spray application pattern required to cover the manual
application area.
MPORTANT: Use caution when spraying near desirable vegeta-
tion or painted surfaces to avoid damage.
IMPORTANT: Use caution when spraying in windy conditions to
avoid damage.
•
To spray, invert the spray bottle and squeeze the bottle with
enough pressure to create the spray pattern needed.
•
To stop spraying, stop squeezing and right the bottle.
Filling the Spot Sprayer.
The spray bottle can be filled directly from the Triumph spray sys-
tem using the Fill Valve.
• Park Triumph on level ground, shift into Neutral, lock both
brakes, open Fill Valve, remove the cap, center the Spot
Sprayer under the Fill Valve, Throttle up the engine, and dis-
pense the spray mix into the spray bottle.
•
When filled release Throttle, close Fill Valve, and install the
spray bottle cap.
Cleanup After Use
• Rinse the Nozzle, Nozzle strainer, cap, and spray components
in water.
•
Inspect the components for wear and damage before reassem-
bly. Replace damaged and worn components.
• Dispose of spray and cleanup water according to the product
label and material safety data sheet.