Dolby Laboratories P/N 91659 - Manual (Page 27)

DolbyRemote Installation and Operation Dolby Digital Parameters
4-11
4.5 Input and Output Settings
Figure 4-6 Input/Output Tab
4.5.1 Input
Lock Status
Lock Status shows whether the input channels for the current coding mode have
been detected and locked by the encoder.
Sample Rate
Sample Rate shows the sample rate of the digital input channels.
Integrity
Integrity shows the data integrity of the digital input channels.
Format
Format is a control parameter that allows you to choose the format of the data
received from the input source. Available Input Format selections are:
•
PCM: Dolby Digital encoding will be enabled. When analog is selected as the
DP567 input source, the input format must always be PCM.
•
Pre-encoded: Pass-through mode will be enabled. Pre-encoded bitstreams
move through the unit, unmodified, to the output.