Dolby Laboratories P/N 91659 - Manual (Page 32)

DolbyRemote Installation and Operation Dolby Digital Parameters
4-16
4.7.2 Configure
Number
Select the number of the present you wish to configure, 1 through 28. Presets 29
through 32 are factory defaults and cannot be overwritten.
Name
Enter a name, if desired, for the preset.
Save Current Configuration
Click this button to save the current configuration in the selected preset.
4.8 Time Code Parameters
Figure 4-9 Time Code Tab
4.8.1 Input
Source
Source allows you to select one of the two time code inputs for receiving time code
signals LTC or VITC.