Dolby Laboratories P/N 91659 - Manual (Page 31)

DolbyRemote Installation and Operation Dolby Digital Parameters
4-15
Stream Number
Stream Number shows the stream number for a pre-encoded bitstream present at the
reference input.
4.6.2 Reference Input Subcode Status Bits
These show the format, sample rate and audio bit as indicated in the subcode of the
reference input signal.
4.7 Presets
Presets 29 through 32 are factory defaults and cannot be overwritten.
Figure 4-8 Presets Tab
4.7.1 Recall
Click on any of the 32 preset buttons to recall one of the 32 complete configurations
for the encoder. These presets are stored internally within the decoder, not within the
DolbyRemote application. Saved presets may be recalled from either the remote
application or the front panel.