Draytek Vigor2100 - Manual (Page 10)

4
1.3 Front Panel LEDs and Rear Panel Interfaces
1.3.1 Vigor2100V
LED Status Explanation
on The firewall function is active.
Firewall
blinking When encountering DoS attacks.
E-mail blinking
When detecting one or more user-defined E-mails existing on
mail server.
orange A normal 10Mbps connection is through its corresponding port.
green
A normal 100Mbps connection is through its corresponding
port.
WAN
blinking Ethernet packets are transmitting.
Solid light when the handset of phone is picked up (off
hooked).
green
Blinking per 2 seconds when phone is connected through
VoIP.
VoIP
orange Solid light when phone call is via PSTN life line.
ACT (Activity) on The router is powered on and running properly.
orange A normal 10Mbps connection is through its corresponding port.
green
A normal 100Mbps connection is through its corresponding
port.
LAN
(P1, P2, P3, P4 )
blinking Ethernet packets are transmitting.
Interface Description
PWR Connect the included power adapter to the power outlet.
Line Connect to the analog phone line for PSTN life line.
Phone Connect to the analog phone for VoIP communication.
WAN Connect the Cable/ADSL modem to access the Internet.
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking), press the hole and keep for more than 5 seconds. When the ACT
LED begins to blink rapidly, release the button. Then the router will restart
with the factory default configuration.
P1, P2, P3, P4 Connect to the local network devices.