Draytek Vigor2100 - Manual (Page 21)

15
1. Enable Wireless LAN:
Check the box to enable wireless function.
2. Mode:
Select an appropriate wireless mode.
Mixed (11b+11g): The radio can support both IEEE802.11b and
IEEE802.11g protocols simultaneously.
11g-only: The radio only supports IEEE802.11g protocol.
11b-only: The radio only supports IEEE802.11b protocol.
3. Scheduler:
Set the wireless LAN to work at some time interval only. You may choose
up to 4 out of 15 schedules that should be defined under Advanced
Setup > Call Schedule Setup. Please refer to the User’s Guide.
4. SSID and Channel:
The default SSID is "default". We suggest you change it to a particular
name. In this case, SSID was changed to “DrayTek”.
SSID (Service Set Identifier): It is used to name the wireless LAN, and
must have the same content in client PC/notebook wireless card(s). SSID
can be any text numbers or various special characters.
Channel: A wireless channel for the router. The default channel is 6. You
can change it to more appropriate one if the selected channel is under
serious interference.
5. Hide SSID:
Check it to prevent from wireless sniffing and make it harder for
unauthorized clients to join your wireless LAN.
3.2 Security
Click Security to configure the security options.