Draytek Vigor2100 User Manual
Page 11
5
1.3.2 Vigor2100G
LED
Status
Explanation
on
The Wireless LAN function is active.
WLAN
blinking
Data packets are transmitted over Wireless LAN.
blinking
When detecting one or more user-defined e-mails existing on
mail server.
orange
A normal 10Mbps connection is through its corresponding port.
green
A normal 100Mbps connection is through its corresponding
port.
WAN
blinking
Ethernet packets are transmitting.
on
The firewall function is active.
Firewall
blinking
When encountering DoS attacks.
ACT (Activity)
on
The router is powered on and running properly.
orange
A normal 10Mbps connection is through its corresponding port.
green
A normal 100Mbps connection is through its corresponding
port.
LAN
(P1, P2, P3, P4
)
blinking
Ethernet packets are transmitting.
Interface
Description
PWR
Connect the included power adapter to the power outlet.
WAN
Connect the Cable/ADSL modem to access the Internet.
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking), press the hole and keep for more than 5 seconds. When the ACT
LED begins to blink rapidly, release the button. Then the router will restart
with the factory default configuration.
P1, P2, P3, P4
Connect to the local network devices.