Draytek Vigor2100 - Manual (Page 9)

3
1.2 Specifications
For Vigor2100V/VG For Vigor2100VG/G
VoIP (Voice over IP)
Supports one FXS(phone) port
G.168 line echo-cancellation
Gain control
Jitter buffer
Voice Codec: G.711 A/µ law,
G.726, G.723.1, G.729 A/B,
VAD/CNG
Tone generation and detection:
DTMF, Dial, Busy, Ring back
Protocol: SIP, RTP/RTCP
Wireless Access Point
IEEE802.11b/g compliant
Wireless client list
Wireless security:
64/128 bits WEP encryption
WPA/WPA2* PSK (IEEE802.1i)
MAC address access control
Hidden SSID
Access point discovery*
Wireless LAN isolation*
WDS*
LAN
4-port 10/100M Base-TX Ethernet
switch
DHCP server for IP assignment
(up to 253 users)
DNS cache and proxy
WAN/Internet
One 10/100M Base-TX port with
a RJ-45 connector
Quick Start Wizard for Internet
access
DHCP client for cable service
Static IP address assignment for
fixed IP networks
PPPoE client
E-mail Detection
LED flashes to indicate E-mail is
waiting on your mail server
(POP3)
Network Features
DHCP client/relay/server
Dynamic DNS
Call schedule
Radius client
UPnP
Firewall Facilities
NAT/PAT, DMZ host,
port-redirect/open port
SPI (Stateful Packet Inspection)
DoS/DDoS protection
Flexible URL content filtering
Rule-based packet filtering
E-mail alert and logging via
syslog
VPN pass through
Router Management
Quick Start Wizard
Command Line Interface (Telnet)
Telnet remote access support
Built-in diagnostic function
Firmware upgrade via TFTP/FTP
Syslog
SNMP management MIB-II (for
Vigor2510V series)
Power Consumption
15V DC 15Watt
*future release