Draytek Vigor2100 - Manual (Page 35)

29
Step 4 Are the ISP Settings OK?
1. Go to the web configuration GUI and check your ISP settings.
2. Click Internet Access Setup items on the left frame of GUI.
A. For PPPoE Users
1. Check that whether the Enable option is selected.
2. Check that whether the Username and Password are entered
with correct value given by your ISP.
B. For Static or Dynamic Users
1. Check that whether the Enable option is selected.
2. Check that whether WAN IP Network Settings is set
appropriately or not. You need to enter “Specify an IP address”,
IP Address, Subnet Mask, and Gateway IP Address with the
correct value.