Southbend NODR14: Floor Model Rinse Station - Manual (Page 5)

NOD14: Floor Model High Efficiency Gas Pasta Cooker
INSTALLATION
L20-393, rev.1 (08/14) 1
Accessories
ITEM DESCRIPTION SSPG14 SSRS14
1 Basket Hanger Standard Standard
2 Tube Rack Standard N/A
3 Drain Cleanout Rod Standard Standard
4 Small Bulk Pasta Basket Optional Optional
5 Large Bulk Pasta Basket Optional Optional
6 Small Round Pasta Basket Optional Optional
7 Large Round Pasta Basket Optional Optional
8 Oblong Pasta Basket Optional Optional
9 Individual Portion Cups/Rack Optional Optional
1. INSTALLATION
1.1. CHECKING YOUR NEW APPLIANCE
Your new Pitco appliance has been carefully packed into one crate. Every effort has been made to ensure that it is
delivered to you in perfect condition. As you unpack your new appliance, inspect each of the pieces for damage. If
something is damaged, DO NOT sign the bill of lading. Contact the shipper immediately; the shipper is only
responsible for 15 days after delivery. Check the packing list enclosed with your appliance to ensure that you have
received all the parts to the appliance. If you are missing any parts, contact the dealer from whom the appliance was
purchased. As you unpack the appliance and its accessories be careful to keep the weight of the appliance evenly
distributed. Refer to the table below to identify which accessories should be included with your appliance.
Locate your Pitco model number and serial number on the inner door of the appliance and the find the date
purchased. Write this information on the front cover of this manual for future reference.
If you have completed the above steps that are
applicable to the appliance you purchased, the
appliance is now ready to be installed. Although it
may be possible for you to install and set up your
new appliance, it is STRONGLY recommended that
you have this done by qualified professionals. A
qualified professional will ensure that the installation
is safe and meets local building and fire codes.
DIAGRAM 1