Taser Axon-Flex - Manual (Page 11)

11 | P a g e
7. Disconnect the camera from your computer.
8. Put the camera back in the box and write the officer’s name on the box.*
9. Issue the box to the assigned officer.
10. For additional cameras, re-start at step 4.
*Allows documentation to be issued along with camera system.
Option B – Administrator Configures the Camera but does not Assign the Camera to
an Officer*
1. Click Start and select All Programs. (If you do not have the EVIDENCE Sync software
installed, see Download and Install EVIDENCE Sync).
2. Click SYNC and select SYNC.
3. Type your login information and click Submit.
4. Connect the camera to your computer using the 2.5 mm to USB cable.
5. Click Cancel on the device assignment window.**
6. Click the Device Settings tab to review and confirm proper camera settings.
• Agency settings can be changed on EVIDENCE.com, but not in EVIDENCE Sync.
o
Agency settings include microphone and video configuration.
• User settings can be changed either on EVIDENCE.com or in EVIDENCE Sync.
o
Orientation - flips the video to match the side of the body on which the officer
wears the camera. (This feature is intended for use with the AXON flex system.)
o
Mode (EVIDENCE Sync Online or Offline) - can only be changed by Administrator or
Armorer when agency allows.