Stage 3: additional system set-up, Step 1 – etm set-up, Step 2 – axon mobile application installation – Taser Axon-Flex User Manual
Page 14: E 14
14 |
P a g e
Stage 3: Additional System Set-up
Step 1 – ETM Set-up
1. Using an Ethernet cable, connect the WAN port on the ETM to the internet.
2. Using an Ethernet cable, connect the LAN port on the ETM to your computer.
3. Connect the ETM to a power source.
4. With the computer still connected to the LAN port, go t
You will see a step-by-step guide in the browser.
• The ETM configuration webpage verifies proper connection and provides instructions
on additional setup.
• If needed, contact TASER technical support at 1.877.270.0553.
5.
The ETM can now accept AXON flex and AXON body cameras for upload to
EVIDENCE.com, and AXON flex controllers for recharging.
Step 2 – AXON Mobile Application Installation
The AXON Mobile application is available for both Android™ and iOS® smart devices. This
application enables you to play back video recorded on your AXON camera via your smart
device. Also, you will be able use your smart device to add descriptions to videos.
Installing the AXON Mobile Application on an Android Smart Device
1. On your smart device, tap Play Store.
2. Click the search icon (the magnifying glass).
3. Type AXON Mobile and tap Enter.
4. Press AXON Mobile.
5. Tap INSTALL.
6. Tap Accept & Download.
7. Tap Open.
The system will ask you if you want to install TASER AXON Service.
8. Tap OK.
9. Tap Install.