Taser Axon-Flex - Manual (Page 19)

19 | P a g e
Battery Status Battery LED
Battery capacity is at 41–100 percent Green
Battery capacity is 20–40 percent Yellow
Battery capacity is less than 20 percent Red
Option B – Charging the AXON Device with a USB Cable
CAUTION
Do not have EVIDENCE Sync active when performing this procedure.
1. Ensure the computer is powered on.
2. Connect the AXON device to the computer using 2.5 mm to USB cable. See the table
under Option A – Charging the AXON Device through the ETM for information on the
charging status.
Option C – Charging the AXON Device with a Wall Charger
1. Connect the AXON device to the wall charger using the 2.5 mm to USB cable.
2. Plug the wall charger into a standard wall outlet. See the table under Option A –
Charging the AXON Device through the ETM for information on the charging status.
Changing the Mode in EVIDENCE Sync
Setting a Camera from Online to Offline Mode in EVIDENCE Sync
The illustrations below show an AXON flex camera, but the procedure is the same for an AXON
body camera.
1. Click Start and select All Programs.
2. Click SYNC and select SYNC.
3. Type your login information and click Submit.
4. Connect the camera to the computer using the 2.5 mm to USB cable.