Taser Axon-Flex - Manual (Page 12)

12 | P a g e
6.a If any settings are changed, click SAVE for new settings to be applied.
7. Disconnect the camera.
8. Issue all cameras to the officers.***
9. Users begin at Step 1 of “Option C - User Assigns.”
*Best practice is to assign the cameras to each officer before they are deployed (go to “Option A – Administrator Configures and Assigns All
Cameras to the Officers” section).
**Officer will not be able to upload the video from the camera through an ETM until the camera is assigned.
***Videos recorded while the cameras are unassigned will be uploaded to the account of the user who is next assigned to the camera.
Option C – User Assigns the Camera
1. Click Start and select All Programs. (If you do not have the EVIDENCE Sync software
installed, see Download and Install EVIDENCE Sync.)
2. Click SYNC and select SYNC.
3. Type your login information and click Submit.
4. Connect the camera to your computer using the 2.5 mm to USB cable.
5. Type your name and click OK to assign the camera to yourself.
Note: After this step is complete, your camera can now upload to the EVIDENCE.com
website directly through the ETM. The next time you dock this camera into the
ETM, the system will recognize the camera as assigned to you, and upload the
data to the appropriate location on EVIDENCE.com.
6. Click the Device Settings tab to review and confirm the proper camera settings.
• Agency-level settings can be changed on the EVIDENCE.com website, but not on a
local computer using EVIDENCE Sync software. Agency-level settings can only be
configured by an agency Administrator. Agency settings include microphone and
video configuration.