Taser X2 - Manual (Page 23)

23 Chapter 3 Features
Two Deployed Cartridges
Battery Capacity
81-100%
Seconds Elapsed in
Cycle for the Second
Cartridge
When both the first and second cartridges are energized each of the two firing bays will run for approximately
5 seconds on its own counter. If the second cartridge is deployed while the first cartridge is still energized, the
first cartridge’s cycle will end before the second cartridge’s cycle ends. Therefore, to energize both cartridge bays,
press the ARC switch. If the ARC switch is held down after the second cartridge's cycle ends, both cartridge bays
will continue to cycle.
NOTE: If the probes from cartridge bay #1 are in subject A and the probes from cartridge bay #2 are in subject
B, then pressing the ARC switch will energize both cartridge bays and both subject A and B will receive the
effects of the CEW.
Shifting the safety switch to the down (SAFE) position stops the cycle for all cartridge bays.
NOTE: Do not pull the trigger and press the ARC switch simultaneously. The trigger will override the ARC switch.