Taser X2 User Manual
Page 16
Invalid
PPM
TASER
CAM™ HD
Recorder
TASER
CAM™
Automatic
Shut-Down
Recorder
APPM
Battery
Pack
Major
Fault
Critical Fault USB
Connection
Good
“LO BATT” flashes on the CID when the safety switch
is cycled to the up (ARMED) position and the battery
capacity is at ≤20 percent.
The “RECHARGE BATTERY” icon flashes if the battery
pack has rechargeable batteries (i.e., with a TASER CAM
HD recorder) and the battery percentage is at 00%. The
CEW will not operate until the battery is recharged.
The “CHANGE BATTERY” icon flashes if the battery pack
does not have a rechargeable battery (i.e., a PPM TPM,
or APPM battery pack) and the battery percentage is
at 00%. The CEW will not operate until the battery has
been replaced.
The ECD will count up
from the number 1.