Taser X2 - Manual (Page 8)

Step 6: Load the Smart Cartridges
Before installing and using a Smart cartridge, inspect the blast doors for cracks. The inspection
should include checking the break seam running down the center and both sides of the front
of the blast door. If the blast doors are cracked, remove the cartridge from service. Also,
inspect the ARC deflector metalized labels. Over time, the labels may show signs of wear.
This is normal. If the labels have worn away completely or fallen off, remove the cartridge
from service.
Use the left hand to load cartridges beginning with the rightmost bay. By loading from right
to left (or left to right if the right hand is used) it is less likely the operator will place fingers in
front of the blast doors of loaded cartridges.