Test Products International 460 - Manual (Page 38)

12. Press the Ch B key, then F4 to acknowledge exiting the Diode Test mode. Select Ch B
a second time to bring the selection options up to the top of the menu. Then in the
Channel B menu, select ON, ENTER, ACV, ENTER. You should now have a dual trace
display. Press the SAVE key. This should give you the following menu selection.
13. In the waveform save menu, select SAVE, F4 (ENTER), then WAVE 1, F4. This will save
the first of the two possible saves in internal memory. Now repeat the waveform save
function (SAVE key), except choose RECALL, F4, WAVE 1, F4. A screen similar to
the following should result:
460 User s Guide Test and Calibration
A-6