Test Products International 460 - Manual (Page 55)

Figure D-2. Save Input Display
Figure D-3. Waveform Display with Identifiers
3. Press Load for Channel 1, and enter the load identifier into the entry box. Use
the Browser utility if needed. Then click Ok. (See example in Fig. D-4). The
result will be the waveform previously recorded.
4. Repeat for Channel B as required. Note that the Print option for the Data View
dialog box is for the data entry only (not the waveform).
Channel 1 Identifier Channel 2 Identifier
460 User s Guide RS-232C / PC Interface
D-3