Tiptop Circadian Rhythms - Manual (Page 36)

34
In Beat Continue mode, groups and presets are switched immediately and the step is not reset.
In Beat Sync mode, Groups or Presets are only switched at the end of each preset.
Fill: Pressing the Fill button activates the Fill for the trigger buttons on and off. While Fill is active,
press the Fill button a second time switches to Fill UI to select the fill rate. The Preset column selects
even notes (8th, 16th,32nd, etc), the Step column selects triplet, and the Channel column selects
dotted values. Holding down the Fill button will toggle the state of trigger recording.
Trigger 1/4/7: Trigger buttons allow for direct output of a step using the corresponding trigger for the
output. When trigger record is active entered steps are quantized to 16th notes in the current preset.
When the trigger button is held down a fill is output but not recorded if Fill is on.
Control 2 Column
Loop Edit: Selects Presets (Green) and group (Red) for loop editing.
Paste: If copied data is present (see Copy above) in the memory buffer, the content of the copied
buffer is pasted into a channel, preset, or group. The buffer can be pasted infinitely after a copy fills
the buffer.
Clock in/ext: Selects internal or external clock source. The format of the clock is set in global view
(see Global View below).
Tap: Tap tempo button. Tap the button twice to set the tempo. The difference between the duration
of the two most recent taps calculates the tempo.
Sync/Boss: Press to enter syncbus as the clock format. Hold until the led turns red to become boss.
Trigger 2/5/8: See trigger 1/4/7 under Control 1 above.
Control 3 Column
Group Loop: Activates the UI for selecting groups to loop on and off. When activated, the button will
be red if group looping is not running and green if groups are being looped. See the Group Loop
section or Quickstart Tutorial 4 for more details.
Clear: Pressing clear arms the clear function. Once armed, the next channel, preset, or group pres-
sed will be cleared of step data.
Swing: Turns swing on and off. There are two rates for swing 8th notes and 16th notes. The amount
of swing is set using the swing knob.
Reset: Pressing the reset button will reset the internal counters and send a reset pulse to the reset
out. If looping is activated, the reset will go to the first preset in the first group in the loop.
Global: Switches the UI to the global view where general settings such as clock format and reset
type can be changed.