Tiptop Circadian Rhythms User Manual

Page 37

Advertising
background image

35

Trigger 3/6: See trigger 1/4/7 above.

Start/Stop: Starts and stops playback. When you press Stop, all current data is written to the internal

memory (this can take up to 2 seconds to complete). The button will turn red when the save is com-

plete. Once saved, your data will be available after powered down and powering up the CR.

NOTE: For all clock modes and both internal and external clock sources, the only way to save data

to the is to press STOP. Stopping the clock on an external clock source device will not save to the

data!

Control 4 Column

Zoom: Displays Zoom view. In zoom view, sub steps are displayed at a higher resolution and can be

edited up to dotted 64th notes (24 ppq). Further, you can create delays to any Step or substep by

holding the substep and turning the swig knob. The led turns red when there is a delay.

Up: For NxN views, Up moves the view of Channels up.

Down: For NxN views, Down scrolls down the view of Channels.

8x8 view

8x8 displays the 8 steps of all 8 channels in a given preset. The step data is in rows with the first step

on the left and step 8 on the right. Channel 1 is the top row and channel 8 the bottom row.

Control 4 is the far right column and can be used to switch to other views or shift to the next Preset

using the Up and Down buttons. When the first Preset is shown the up button is red showing that no

scrolling is possible using Up. Likewise, the Down button turns red when preset 8 is shown.

4x16

In 4x16 view, 16 Steps of 4 Channels are shown for one Preset only. The Up and Down buttons

indicate if channels 1-4 are shown (Up is lit) or channels 5-8 (Down is lit).

2x32

In 2x32 view, 32 Steps of 2 Channels are shown for a single Preset. The Up and Down buttons

navigate between the four pairs of Channels out (1-2, 3-4, 5-6, 7-8) and the Up button turns red on

channels 1-2 while the Down button turns red for channels 7-8.

1x64

In 1x64 view, all 64 Steps of a single Channel in a Preset are displayed. The Up and Down buttons

scroll through the Channels with Up turning red at Channel 1 and down turning red at Channel 8.

Advertising
This manual is related to the following products: