Tiptop Circadian Rhythms - Manual (Page 44)

42
Trigger buttons
In Vertical view, each trigger channel has a dedicated button for triggering single pulses, fills or ma-
nually recording steps.
With fill and recording off, pressing one of the trigger buttons outputs a single short trigger of that
channel. This can be useful for adding single accents during a performance or for testing purposes.
These triggers are not recorded into your Preset
Fills
The CR can insert fills to a running program at various rates. This feature is controlled by the Fill
button in control column 1.
1. Enable fills by pressing the fill button which lights up green when fills are active.
2. Hold any trigger button down for a Fill. We designed Fills to be used as accents during a
performance, so Fills are not recorded into the steps in a pattern.
3. Press the Fill button again to while Fills are active to enter the Fill UI view. The Group, Preset
and Step columns are used to set the fill rate:
Group Preset Step
1/4 1/4 triplet 1/4 dottted
1/8 1/8 triplet 1/8 dotted
1/16 1/16 triplet 1/16 dotted
1/32 1/32 triplet 1/32 dotted
1/64 N/A 1/64 dotted
4. To leave the fill UI, press the Vertical view button.
Trigger recording
1. Trigger recording allows for live drummachine-style pad entry of Steps using the trigger but-
tons.
2. Enter Vertical view.
3. Hold down the Fill button until the Trigger buttons turn red. Trigger recording is now active.
4. Press the Trigger button at the point in the pattern you want the trigger to Trigger your Chan-
nel output. Triggers are quantized to 16th note steps.
5. To exit Trigger recording, hold down the Fill button until the trigger buttons are no longer lit.