Tiptop Circadian Rhythms - Manual (Page 41)

39
Swing
The CR can add swing on both 8th and 16th notes. To enable swing, enter vertical view and press
the swing button. The first press will turn the button green indicating 8th note swing, pressing again
turns the button red for 16th note swing. Pressing the button again disables swing and the led is off.
Swing amount is set by the swing knob. The even numbered 8th or 16th notes are delayed in incre-
ments of a single internal clock tick (96 PPQ) and the amount of delay ranges from no delay to the
next 16th note step.
By default, all channels are swung by the swing value you set. However, the CR also lets you apply
swing on a per-channel basis. For example, you can apply swing only to your hi-hat and toms chan-
nels but not swing any of the other six channels.
Here’s how you edit the channels included in the swing operation:
• Change to Vertical View
• Hold the Swing button down until all of the Channel LEDs turn on indicating Swing Edit Mode
• Green LEDs indicate that swing is on for that channel; swing is off when the LEDs are Red
• Press the Channel buttons to turn swing on and off for that Channel
• Hold Swing down until the Channel LEDs change back to only one Green LED to exit Swing
Editing.