VAC Phi "Kappa 30i" User Manual
Page 5
4
UNPACKING & ASSEMBLY
The Phi Kappa is shipped with the vacuum tubes and glass covers removed. Should the
need ever arise, the following directions illustrate how to install the glass; follow these steps
in reverse order to remove the glass.
THE AMPLIFIER AND POWER SUPPLY ARE HEAVY. IT IS ADVISABLE TO HAVE ASSISTANCE IN
UNPACKING, MOVING, AND SETTING UP. BE SURE TO USE PROPER LIFTING TECHNIQUES TO
AVOID BACK STRAIN AND INJURY. BE CERTAIN TO INSTALL IT IN A SECURE LOCATION FROM
WHICH IT CAN NOT FALL OR TIP OVER.
Remove the screws that secure the aluminum
top frame to the chassis pillars using the tool
provided. Turn counterclockwise to remove.
Take care to prevent the tool from scratching
the chassis.
Note: tubes should not be installed yet.
Remove the top screws along the back edge.
Remove the top frame.