WaterFurnace Envision Low Sill - Manual (Page 35)

35
ENVISION LOW SILL CONSOLE INSTALLATION MANUAL
Unit Startup Notes
Electrical Disconnect
Optional field installed console disconnect provides a
permanent electrical connection to the main electrical
supply branch. Wiring between the disconnect and the
unit chassis is field supplied and allows the electrical power
source to the chassis to be interrupted for unit servicing.
Non-Fused
Constructed of heavy gauge galvanized steel, the
rocker style disconnect switch provides reliable
electrical control. Wiring pigtails, using 12-gauge wires,
are factory installed to simplify field wiring.
Fused
Similar in construction to the non-fused electrical
disconnect. The fused disconnect is available in
five models with equipment rated fuses to provide
additional circuit protection. The fuses are panel
mounted to allow easy inspection and removal without
removing the cover on the disconnect.
CFD-10 - 10 amp rated fuse
CFD-12 - 12 amp rated fuse
CFD-15 - 15 amp rated fuse
CFD-20 - 20 amp rated fuse
CFD-25 - 25 amp rated fuse
Hydronic Loop Controller for
Boiler/Tower Installations
The hydronic loop controller is a microprocessor based
control panel for control of water loop heat rejector
(tower), heat supplier (boiler), and/or water well pumps
and circulation pumps. Includes audible and visual alarms,
temperature indication, and add-on options of low switches,
remote alarm sensor wells and pump alternator.