Weston Pro 1100 Vacuum Sealer - Manual (Page 10)

-9-
1. To create bags using the roll holder, remove the roll holder rod from the cilps at the
back of the vacuum sealer ( Figure 6).
2. Slide the rod through the center opening of the roll (will hold bags up to 11” wide).
3. Fold the roll holder arms out and rest the rod in the slots on the roll holder arms,
carefully lining up the notches in the rod with the slots in the arms.
4. It is easier to cut bags from the roll when the bags are rolled over the roll (as
opposed to under the roll) ( Figure 7).
5. Move the bag cutter towards the lid and pull the vacuum bag over the cutter slot
until you have reached the desired length.
6. Move the bag cutter back over the top of the bag roll, making sure the blade is to
one side.
7. Slide the blade across the bag roll to cut your roll into your custom bag size
( Figure 8).
USING THE ROLL HOLDER & CUTTER
WARNING!
Before cleaning, assembling or disassembling the Vacuum Sealer,
make sure the Vacuum Sealer is OFF and the PLUG IS REMOVED FROM THE
OUTLET/POWER SOURCE!
Figure 6
POWER INDICATOR
ON
OFF
8 AMP FUSE ONLY
Figure 7 Figure 8