Xblue Networks X16 - Manual (Page 23)

Issue 2 -
23 -
Progr
am
m
in
g
Ringer Type – Each extension user can select
from 6 different ring tones for each of the 6
CO Lines. Press the navigation key up or
down to scroll through the different tones.
If a second call rings into the system while
you are on a call you will hear a beep tone.
Change this parameter to “No” to eliminate
the tone.
When set to “Off” the backlit display will go
into power saver mode and go dark after 60
seconds. It will illuminate if it rings or a
button is pressed.
Call Forward – Each extension can select
where calls will be forwarded to when they
are busy or when a call goes unanswered.
Waiting Time – The call waiting time is the
amount of time a call will ring before it is sent
to the programmed destination. Waiting Time
uses the up or down navigation key to select
from 00 (immediate Forward to 25 seconds.)
The default is 10 seconds.
Line1 Ring Type
=Type-1
Line2 Ring Type
=Type-1
Line3 Ring Type
=Type-1
Line4 Ring Type
=Type-1
Line5 Ring Type
=Type-1
Line6 Ring Type
=Type-1
AUTO MUTE
Ringer Type
AUTO MUTE
Call Forward
AUTO MUTE
Waiting Time
=10 Seconds
AUTO MUTE
2
nd
Call Beep
= Yes
AUTO MUTE
LCD Backlight
=On