G-Shock GW-9200BPJ-1 - Manual (Page 132)

E-130
• Friction caused by certain conditions (frequent external force, sustained
rubbing, impact, etc.) can cause discoloration of painted components.
• If there are printed figures on the band, strong rubbing of the printed area
can cause discoloration.
• Failure to clean dirt from the watch for long periods can cause fluorescent
color to fade. Wash dirt off with water as soon as possible and then dry the
watch.
• Semi-transparent resin parts can become discolored due to sweat and dirt,
and if exposed to high temperatures for long periods.
• Contact an authorized CASIO Service Center to have resin components
replaced. Note that you will be charged for replacement costs.
Natural Leather and Imitation Leather Bands
• Allowing the watch to remain in contact with other items or storing it
together with other items while it is wet for long periods can cause the color
of the other items to transfer to the natural leather or imitation leather band
of the watch. Be sure to dry off the watch thoroughly before storing it and
make sure it is not in contact with other items.