G-Shock GW-9200BPJ-1 - Manual (Page 77)

E-75
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the
mode the watch is in. In the case of the snooze alarm, the alarm operation is
performed a total of seven times, every five minutes, until you turn the alarm
off (page E-76).
• Alarm and Hourly Time Signal operations are performed in accordance with
the Timekeeping Mode time.
• To stop the alarm tone after it starts to sound, press any button.
• Performing any one of the following operations during a 5-minute interval
between snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-96)
Displaying the
SNZ setting screen (page E-74)
To test the alarm
In the Alarm Mode, hold down E to sound the alarm.