G-Shock GW-9200BPJ-1 User Manual
Page 60
Advertising
E-58
Clearing the Historical Record
Use the following procedure to clear the contents of the historical record and
restart all values from zero.
To clear the historical record
• Before trying to clear data, first check to make
sure that the Altimeter Mode stopwatch is
stopped and reset to all zeros (page E-44).
1. Press the D button to enter the Data Recall
Mode.
2. Hold down A.
•
CLR
will appear in the upper part of the
display.
3. Keep A held down for an additional two seconds until
CLR
starts flashing.
• The historical record high altitude screen will reappear when data deletion
is complete.
• If you release the A button before
CLR
starts flashing in step 3, the
watch will return to the historical record high altitude screen without
deleting the data.
Advertising
This manual is related to the following products: