G-Shock GW-9200BPJ-1 User Manual
Page 33
E-31
Signal Reception Troubleshooting
Check the following points whenever you experience problems with signal
reception.
•The watch is not in the Receive
Mode.
•Your current Home City is not
one of the following: LON, PAR,
BER, ATH, HKG, TPE, TYO,
LAX, DEN, CHI, or NYC
•You changed the time setting
manually.
•The DST setting was changed
manually in the World Time
Mode.
•You pressed a button while signal
receive was in progress.
Cannot perform
manual receive.
Auto receive is
turned on, but
the Level 3
signal indicator
does not
appear on the
display.
•Enter the Receive Mode
and try again.
•Select LON, PAR, BER,
ATH, HKG, TPE, TYO,
LAX, DEN, CHI, or
NYC as your Home City
(page E-13).
•Perform manual signal
receive or wait until the
next auto signal receive
operation is performed.
What you should do
Problem
Probable Cause