G-Shock GW-9200BPJ-1 - Manual (Page 47)

E-45
2. Press the E button to start and stop the Altimeter Mode stopwatch.
• While an Altimeter Mode stopwatch operation is in progress, the display
shows the elapsed time, current altitude, and the change in altitude
since the start of the stopwatch operation.
3. After you are finished using the Altimeter Mode stopwatch, press the B
button to reset it to all zeros.
• While an Altimeter Mode stopwatch operation is in progress, you can toggle
between the altitude graph and the altitude change indicator by pressing
the
A button. The altitude change indicator graphically shows how the
current altitude reading differs from the previous reading. The type of
indicator that appears depends on the relative size of the altitude change.
Current Stopwatch Session Record
The current stopwatch session record contains the data described below. The
contents of this record are retained until you start a new Altimeter Mode
stopwatch measurement session.
3145_E_p034_051.p65 10.10.5, 11:08 45