Dukane 8755G-RJ - Manual (Page 20)

9
Adjusting the position
1.
Press POSITION button on the remote control when no menu
is indicated.
The “POSITION” indication will appear on the screen.
2.
Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press RESET button on
the remote control during the operation.
To complete this operation, press POSITION button again. Even
if you do not do anything, the dialog will automatically disappear
after a few seconds.
● When this function is performed on a video signal, s-video signal or component
video signal, some image such as an extra-line may appear at outside of the
picture.
● When this function is performed on a video signal, s-video signal or component
video signal, the range of this adjustment depends on OVER SCAN in IMAGE
menu (29) setting. It is not possible to adjust when OVER SCAN is set to 10.
● If POSITION button is pressed when a menu is indicated on screen, the
displayed picture does not move its position but the menu does.
Operating
Using the automatic adjustment feature
1.
Press AUTO button on the remote control.
Pressing this button performs the following.
 For a computer signal
The vertical position, the horizontal position and the horizontal
phase will be automatically adjusted. And the horizontal size
will be automatically set to the default.
Make sure that the application window is set to its maximum
size prior to attempting to use this feature. A dark picture may
still be incorrectly adjusted. Use a bright picture when adjusting.
 For a video signal, s-video signal or component video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when AUTO is selected for
VIDEO FORMAT item in INPUT menu (32) .
The vertical position and horizontal position will be automatically set to the
default. For a component video signal, also the horizontal phase will be
automatically set to the default.
● The automatic adjustment operation requires approx. 10 seconds. Also
please note that it may not function correctly with some input. When this
function is performed for a video signal, a certain extra such as a line may
appear outside a picture.
● The items adjusted by this function may vary when FINE or DISABLE is
selected for AUTO ADJUST item of SERVICE item in OPTION menu (43) .
POSITION button
HOME PAGE UP
PAGE DOWN END
VIDEO SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER
AUTO button
HOME PAGE UP
PAGE DOWN END
VIDEO SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER