Option menu (continued), Continued on next page) – Dukane 8755G-RJ User Manual

Page 43

Advertising
background image

4

Item

Description

MY BUTTON

This item is to assign one of the following functions to MY BUTTON 1 and 2

on the remote control (6).

Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then

using the ▲/▼ buttons sets one of the following functions to the chosen

button.
• COMPUTER1: Sets port to COMPUTER IN1.

• COMPUTER2: Sets port to COMPUTER IN2.

• COMPONENT: Sets port to COMPONENT(Y, Cb/Pb, Cr/Pr)

• S-VIDEO: Sets port to S-VIDEO.

• VIDEO: Sets port to VIDEO.

• e-SHOT: Displays the e-SHOT menu (52).

• INFORMATION: Displays a dialog of INPUT -INFORMATION- or NETWORK

-INFORMATION- (44, 53).

The displayed dialog is switched as below every time the MY BUTTON is

pushed.

When an input signal is found:

INPUT -INFORMATION-  NETWORK -INFORMATION-  OFF

When an input signal is not found:

NETWORK -INFORMATION- ó OFF

• AUTO KEYSTONE EXECUTE:

Performs automatic keystone distortion correction (34).

• MY MEMORY: Loads one of adjustment data stored (27).

When more than one data are saved, the adjustment changes every time

the MY BUTTON is pushed.

When no data is saved in memory, the dialog

"No saved data" appears.

When the current adjustment is not saved

to memory, the dialog as shown in the right

appears.

If you want to keep the current adjustment, please press the ◄ button to

quit. Otherwise loading a data will lose the current adjusted condition.

• PICTURE MODE: Changes the PICTURE MODE (24).

• FILTER RESET: Displays the filter time reset confirmation dialogue (41).

• VOLUME+: Set the volume up.

• VOLUME-: Set the volume down.

SERVICE

Selecting this item displays the SERVICE menu.

Select an item using the ▲/▼ buttons, and press the ► button or the

ENTER button to execute the item.

FAN SPEED ó AUTO ADJUST ó GHOST ó FILTER MESSAGE ó KEY LOCK

FACTORY RESET ó I NFORMATION ó REMOTE FREQ.

FAN SPEED

Using the ▲/▼ buttons switches the rotation speed

of the cooling fans. The HIGH is the mode for use at

highlands etc. Note that the projector is noisier when the

HIGH is selected.

HIGH ó NORMAL

OPTION menu (continued)

OPTION menu

(continued on next page)

Advertising
This manual is related to the following products: