Dukane 8755G-RJ - Manual (Page 82)

16
Date/Time Settings (Continued)
Click the [Apply] button to save the settings.
Item Description
Time difference
Configures the time difference.
Set the same time difference as the one set on your PC. If
unsure, consult your IT manager.
SNTP Server IP Address
Configures the SNTP server address in IP format.
• The address allows not only IP address but also domain name
if the valid DNS server is setup in the Network Settings. The
maximum length of host or domain name is up to 255 characters.
Cycle
Configures the interval at which to retrieve Date and Time
information from the SNTP server (hours:minutes).
SNTP
Click the [ON] check box to retrieve Date and Time
information from the SNTP server and set the following items.
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network administrator
before setting server addresses.
• To enable the SNTP function, the time difference must be set.
• The projector will retrieve Date and Time information from the time server and
override time settings when SNTP is enabled.
• The internal clock’s time may not remain accurate. Using SNTP is recommended
to maintain accurate time.
NOTE
Configuring and Controlling the Projector via a Web Browser