Mini 2008 Cooper Convertible - Manual (Page 58)

56
AUTOMATIC TRANSMISSION WITH STEPTRONIC *
In addition to the fully automatic mode,
you can shift gears manually using Step-
tronic, refer to page
57 .
Selector lever positions
P R N D M/S + –
Range selection
>The selector lever can be moved out of
position P when the ignition is switched
on or the engine is running: interlock.
>While the vehicle is stationary and
before shifting out of P or N, depress the
footbrake in order to disengage the
selector lever's lock mechanism: shift-
lock.
Keep your foot on the brake until start-
ing off, otherwise the vehicle will start
to move when a drive position is
engaged.
A lock prevents the selector lever from acci-
dentally being moved to the R or P posi-
tions. To override the lock, press the button
on the front of the selector lever knob, see
arrow.
If the engine speed is too high when
the vehicle is at a standstill, the selec-
tor lever is also blocked to protect the
transmission.
If the selector lever is not placed in
position P when the vehicle is parked, the
position display of the selector lever stays
on. This can lead to battery discharge.
<
P Park
Select only when the vehicle is completely
stopped. The transmission locks to prevent
the drive wheels from turning.
R Reverse
Select only when the vehicle is completely
stopped.
N Neutral: idle
Select this when you are in a car wash, for
example. The vehicle can roll.
D Drive: automatic driving position
This position is designed for driving under
all normal operating conditions.
Under normal operation conditions, fuel
consumption is lowest when you drive in
position D.
Online Edition for Part no. 01 41 0 014 845 - © 08/07 BMW AG