User dip switch, User leds, Push button switches – Altera Arria V GX FPGA User Manual
Page 29
Chapter 6: Board Test System
6–7
Using the Board Test System
July 2012
Altera Corporation
Arria V GX FPGA Development Kit
User Guide
1
If you exceed the 16 character display limit on either line, a warning message appears.
User DIP Switch
The read-only User DIP switches control displays the current positions of the
switches in the user DIP switch bank (SW2). Change the switches on the board to see
the graphical display change accordingly.
User LEDs
The User LEDs control displays the current state of the user LEDs for FPGA 1. To
toggle the board LEDs, click the 0 to 7 buttons to toggle red or green LEDs, or click the
All
button.
Push Button Switches
The read-only Push button switches control displays the current state of the board
user push buttons. Press a push button on the board to see the graphical display
change accordingly.