The sram&flash tab – Altera Audio Video Development Kit, Stratix IV GX Edition User Manual
Page 29
Chapter 6: Board Test System
6–7
Using the Board Test System
© November 2009 Altera Corporation
Audio Video Development Kit, Stratix IV GX Edition User Guide
1
If you exceed the 16 character display limit on either line, a warning message appears.
User DIP Switch
The read-only User DIP switch control displays the current positions of the switches
in the user DIP switch bank (SW3). Change the switches on the board to see the
graphical display change accordingly.
User LEDs
The User LEDs control displays the current state of the user LEDs. Click on the
graphical representation of the LEDs to turn the board LEDs on and off.
Push Button Switches
The read-only Push button switches control displays the current state of the board
user push buttons. Press a push button on the board to see the graphical display
change accordingly.
The SRAM&Flash Tab
The SRAM&Flash tab allows you to read and write SRAM and flash memory on your
board.
shows the SRAM&Flash tab.