Altera Nios II - Manual (Page 19)

Altera Corporation 19
October 2005 Nios II Evaluation Kit User Guide
The Nios II Evaluation Board
1
If the Console view is not visible, click on the Console tab to
display the view.
Downloading Executable Code to the Nios II Evaluation Board
From the Nios II IDE, perform the following:
1. On the Run menu, click Run... . The Run dialog box opens.
1. Select Nios II Hardware in the Configurations pane and click New.
2. Click the Target Connection tab.
3. Select Nios II Evaluation Board from the JTAG cable list.
Wait while the Nios II IDE sets up the run configuration. The Run
button becomes active when this process is complete.
4. Click Run at the bottom of the dialog box. The hello_world image
downloads to the Nios II evaluation board and executes.
The results appear in the Console view of the Nios II IDE. See
Figure 6 on page 20.
1
If the Console view is not visible, click on the Console tab to
display the view.